After the introduction of POD systems, the world of vaping has changed quite a lot, and it is impossible to say unequivocally whether it is positive or negative. It has simply become different. Completely different devices have become in demand among vapers. The practice showed that POD-systems format is popular but not among all vapers because such devices are too simple and many people want to be able to configure and fully service devices. That’s why on the market came sub-mods that in most cases resemble “single tank”, but not with a tank or drip, but with a cartridge. One of the most popular submods is the Rincoe Manto AIO Pod Kit. Given the fact that this device was released quite a long time ago, the manufacturer decided to update it and adapt it to modern realities, and as a result the Rincoe Manto AIO Plus Pod Kit saw the light.
General information
Rincoe Manto AIO Plus Pod Kit is a medium sized submod, designed to use one 18650 battery, equipped with a Manto 2.0 chip, for installation of branded vaporizers or RBA base. The form factor of the device developers decided to leave the same – a small box with rounded corners, but on the design they have worked well, since the device resembles a pager, although the management and ergonomics this affects positively. Thanks to an updated proprietary chipset, the vaper will get a varivatte of up to 80 watts and almost instantaneous board response. The device is designed to use proprietary vaporizers on the grid with a resistance of 0.15 and 0.3 ohms, as well as serviced base. The Rincoe Manto AIO Plus Pod Kit is available in six flavors – black and white, purple, black, blue and white, red and yellow, and yellow and green.
Equipment set
The device belongs to the middle class segment, so it is equipped quite standard and without any extravagances:
– Battery pack Manto AIO Plus Device;
– Manto AIO Plus Pod;
– 0.3 Ohm vaporizer (pre-installed);
– 0.15 ohm vaporizer;
– USB Type-C cable;
– Certificate;
– Warranty card;
– User’s Manual.
Manto AIO Plus Device Battery Pack
Among the great variety of vape mods on the market, Rincoe Manto AIO Pod Kit has been the leader for several years, it is a reliable and productive device, and it is rare to hear any complaints about it. Vapers have been bribed by its ease of use and maintenance, as well as its replaceable battery and the possibility of installing an RBA base. In order to once again interest vapers, the company decided to update this popular sub-mod and release the Rincoe Manto AIO Plus Pod Kit – a version that has a lot of positive differences from its predecessor.
Rincoe’s designers didn’t change the form factor of the new sub-mod, leaving it almost the same as the first version – a rectangular box of medium size with rounded corners. But the design of the device became more interesting – it resembles a pager or an old cassette player, and such changes had a positive effect on ergonomics – the device became more convenient and understandable to operate. The back panel is removable, held by magnets, so the manufacturer provides for the possibility of customizing the device. Rincoe Manto AIO Plus Pod Kit can not be called big – 82 * 47 * 28 mm, but it weighs about 90 grams, so in your pocket it will 100% feel.
An important feature and advantage of the Rincoe Manto AIO Plus Pod Kit is an interchangeable traditional 18650 battery, which is installed under the panel, held by magnets.
If the need arises, the battery can be charged using the USB Type-C connector located on the side edge with 1A current.
In the Rincoe Manto AIO Plus Pod Kit installed proprietary updated chipset Manto 2.0, which has become more stable and faster (response time of 0.001 seconds). Functionality of the device remained the same – Varivatte with a maximum power of 80 watts, but for most vapers this will be quite enough. The device is equipped with monochrome display, on which the vaper can find a minimum set of information about the device – the power, the resistance of the coil, the battery level. And during the work around the display LED backlight is on.
Manto AIO Plus Pod
Considering that Manto AIO Plus belongs to the AIO (All in One) segment, it uses a small cartridge installed under the removable magnet panel that covers the battery compartment. The cartridge is equipped with traditional 510-type, which can be easily replaced with any other cartridge from your collection.
The Manto AIO Plus Pod cartridge is designed to fit all vaporizers for this series, but it comes with two – both on a 0.15 and 0.3 ohm mesh, so there are no problems with flavor and bulk. If you want, you can install a serviced base, but it must be purchased separately.
Adjustment of blowing in the cartridge is provided – it is made with a ring put directly on the vaporizer.
To fill the cartridge you need to remove the magnetic cap, open the silicon plug and pour 3 ml of liquid.
Conclusions and impressions
We can’t say that the Rincoe Manto AIO Plus Pod Kit is radically different from the first version. Naturally, it has refined some points, but the basic principle remains the same, and the remarks to the version Plus are the same as to the first release. But at the same time, the vaper will get a standalone, practical, easy to use and maintain submod, which is perfect for vaping liquids on both alkaline and salt nicotine, provided you install the appropriate coil.
Advantages and disadvantages
Disadvantages
– Serviced base must be bought separately;
– You have to remove the lid to refill and adjust the airflow.
Advantages
– Compact size;
– Original design;
– 510-type drip tip;
– 18650 battery;
– Fast charging;
– Productive and reliable chipset;
– Support for mesh vaporizers and RBA base;
– Adjustable blow-off.
