It is unlikely that anyone will argue that the hype around vaping in the last couple of years has subsided a bit, but this does not mean that the number of vapers has decreased, on the contrary, it is constantly growing. And one of the reasons for the increase in the number of vapers is the new format devices, which are compact, autonomous, and the possibility of vaping liquids with salt nicotine. And for vapers who are not quite ready to switch to salt nicotine liquids, sub-mods have been developed. The most famous sub-mod from the company GeekVape considered Boost, but the developers decided to release not less interesting device – Aegis Eteno E100 POD kit, which is very similar to well-known box-mod Aegis 100, but adapted to the modern market realities.
General info
GeekVape Aegis Eteno E100 POD kit is a mid size submod with a removable 18650 battery, AS 3.0 chip and a sub tank for installation of P series vaporizers. It is made in a traditional for this series design – with many ledges and recesses, with eco leather inlay and physical lock keys. Thanks to the AS version 3.0 chipset the vaper will get good functionality and power, so the sub-mod can confidently replace the traditional box mod and tank. The cartridge is made in a sub-tank format, designed for installation of P-series vaporizers, and it can be turned into a regular tank with 510-m connector with the help of an adapter. Buy GeekVape Aegis Eteno E100 POD kit is available in six colors – black, blue, beige, red, gray and rainbow.
Kit
The manufacturer has taken care that the vaper, who bought such a sub-mod, did not have any difficulties with its use and maintenance. Therefore, in the box the vaper will be able to find:
– Aegis Eteno E100 Battery Pack;
– Aegis Eteno E100 POD cartridge;
– Extractor for vaporizers;
– Replacement Earings;
– P Series Coil 0.2 Ohm vaporizer (pre-installed);
– P Series Coil 0.4 ohm vaporizer;
– USB Type-C cable;
– User’s Manual.
Aegis Eteno E100 Battery Pack
Every vaper has definitely heard of the company Geek Vape. Even if he or she has never had to use their devices, he or she has heard about it for sure. The company has gained the trust of vapers with its quality and original developments that have been in the top sales for years (just remember Zeus X, Aegis Legend and Boost). But this success doesn’t stop the developers of the company, on the contrary, it stimulates the creation of new devices. If you look at the range of the company, you can find a lot of POD systems, released recently, and almost no sub-mods. Deciding to correct this mistake, the company presented GeekVape Aegis Eteno E100 POD kit – a slightly reworked familiar to vapers box mod, but in a new format.
It is enough to look at GeekVape Aegis Eteno E100 POD kit and immediately it becomes clear what device it was designed based on – it is well known to vapers Aegis 100, but slightly remade. The design of the device is the same – with numerous protrusions, semicircular one side with eco leather insert, and flat second side with control panel. The device can hardly be called tiny – 134,5 * 39,56 * 33 mm, but this does not make it uncomfortable in operation, on the contrary, it sits perfectly in your hand.
Given the fact that this device belongs to the Aegis family, it is made in accordance with IP68 protection standard, so the device is not afraid of moisture, dust and falls, but drop it into the 8th floor and drown in a lake is still not recommended.
GeekVape Aegis Eteno E100 POD kit uses a traditional 18650 battery, installed from the bottom under the screw cap (for ease of use it has a hinged bracket). If necessary, the battery can be charged using the waterproof USB Type-C connector, located under the control buttons, with a current of 2A.
On the side surface of the device there is a mechanical key for locking the keyboard, so you can lock the device and do not be afraid of accidental button presses.
An important feature of this sub-mod is that it runs under the AS 3.0 chipset, so the vaper will not only get the opportunity to set the power up to 100 watts, but also a good functionality. The vaper has several modes – SMART/POWER/BOOSTING/VPC/TC-NI/TC-TI/TC-SS/TC-TCR, which is quite a rarity for devices in this format. The device is equipped with a 1.06-inch color display with a standard set of information about the device’s operation.
Aegis Eteno E100 POD Cartridge
The Aegis Eteno E100 POD cartridge, though designed in a sub-tank format, is more reminiscent of a traditional tank. The similarity adds to the fact that the cartridge can be installed in a special adapter and used on other devices with a traditional 510 connector. The cartridge is held in the battery pack by magnets.
GeekVape Aegis Eteno E100 POD kit is designed to install the P-series vaporizers already well known to vapers. The kit comes with two vaporizers – 0.2 and 0.4 ohms, both on mesh, so there will be no problems with flavor and bulk.
The cartridge uses overhead blowing technology, making it a “non-pouring” format. Blowout adjustment is done with a swivel ring on top of the unit.
To refill the cartridge, you need to unscrew the top cap, held by the bayonet principle, and pour 4.5 ml of liquid into the tank.
Conclusions and impressions
If a vaper is looking for an alternative and replacement for the traditional single battery box mod and sabom tank, the GeekVape Aegis Eteno E100 POD kit is exactly what he needs. The vaper will get a standalone, practical, functional and productive device, which in addition is able to please the taste and bulk.
Advantages and disadvantages
Disadvantages
– IP68 protection is not fully implemented;
– The device is not designed for a tight cigarette puff.
Advantages
– Recognizable design;
– Ergonomic enclosure;
– Rechargeable battery 18650;
– Fast charging;
– High-performance chipset;
– Good functionality;
– Easy refilling;
– Large capacity cartridge;
– “non-pour” design.
