If you closely follow the vape market, you can confidently say that it is developing a little strange, according to some of its own, incomprehensible to many laws. And many examples of this have been replaced by 200+ Watt box mods, which many vapers have been successfully putting on the shelf lately, preferring POD systems and sub-mods to them. Therefore, manufacturers who try to keep up with the times regularly release something new. Aspire has repeatedly delighted its fans with POD systems and sub-mods, focusing on performance and functionality in them. Deciding to slightly change the concept, the developers presented Aspire Cloudflask an interesting device that definitely deserves attention. On the one hand, this is a completely standard AIO system with replaceable evaporators, and on the other hand, it is the most simple POD system with minimal control and functionality. At the same time, the device is made in the original form factor, unusual and at the same time stylish.
General information
Aspire Cloudflask POD system, equipped with a powerful battery, without the ability to set the operating power and designed for the use of replaceable coils. The form factor in which the device is made will pleasantly surprise many; it resembles a small stainless steel flask, additionally dressed in an original case. The chipset is quite simple, equipped with a standard set of protections and designed for using the device in bypass mode. A sufficiently large cartridge is designed for the installation of replaceable evaporators designed specifically for this device. The Aspire Cloudflask comes in stainless steel, but the vaper can buy it in four variants (according to the color of the case) black, red, gray and brown.
Equipment
Taking into account the fact that the device is quite simple, its equipment is also not particularly surprising, but at the same time, the vaper will find everything he needs for trouble-free use of the device immediately after purchase. In the vaper box awaits:
Battery Pack Cloudflask Battery;
Removable 5.5ml Cloudflask Pod Cartridge;
Dual 0.25ohm Mesh Coils;
USB Type-C cable for charging;
Spare orings;
Warranty card;
User’s Manual.
Cloudflask Battery Pack
For a long time now, none of their vapers have been surprised by POD systems and sub-mods, which, in terms of their functionality and performance, are practically not inferior to full-fledged box mods. Therefore, it is not surprising that manufacturers are looking for some non-standard solutions that can attract the attention of vapers. These devices include Aspire Cloudflask, which can be considered a full-fledged AIO system that can please vapers with its original design and a good combination of flavor and bulk.
The design of Aspire Cloudflask is a special pride of the company’s developers, as the device is made in the form of a small stainless steel flask. At the same time, it is really small 92 * 54 * 25 mm, so it fits perfectly in your pocket. In order for the device to be used as conveniently as possible, the manufacturer offers four options for covers, which have all the necessary holes for using the device, and also provides a small lanyard for wearing on the hand.
The final image of the flask is complemented by an interchangeable 810th non-ringed drip-type, moreover, it is a two-piece made of acrylic and stainless steel. But the very fact of such a drip-type is already interesting and original.
The Aspire Cloudflask is powered by a built-in 2000 mAh battery, which seems to be not bad, but given the fact that the evaporators have a resistance of 0.25 ohms, then it will definitely not be enough for several days of use. The battery is charged using the USB Type-C connector located on the side surface, with a current of 2A (full charge time will be about an hour).
Aspire Cloudflask works only in bypass mode, but the built-in chipset allows you to get a full set of protections necessary for stable operation of the device. Management is extremely simple – the Fire button located in the center, around which there is an LED that signals the operation of the device and the battery charge level.
Cloudflask Pod Cartridge
If you look, the Aspire Cloudflask is not the smallest device (this is due to a fairly powerful battery), but it is available in this size and plus a removable cartridge of considerable capacity. In the battery pack, the cartridge is held by latches, which can be opened using two buttons located on both sides of the device.
The fact that Aspire has provided only one type of vaporizer for Cloudflask – 0.25ohm Mesh Coil, is a bit disappointing, since not every vaper will like it. But at the same time, the evaporator is on a grid, so there will be plenty of taste, especially since the cartridge is designed for an unregulated DTL puff.
You can change the evaporator in just a couple of minutes, just remove the cartridge, turn it over and just get the old evaporator and install a new one.
Refilling the cartridge is quite simple and straightforward. The cartridge is removed from the battery pack, turned over, the silicone stopper is opened and 5.5 ml of liquid is poured.
Conclusions and impressions
Aspire Cloudflask causes a double impression, since on the one hand it is an original and non-standard device, and on the other hand, there is no airflow control and only one type of evaporators. We can honestly say that Cloudflask is a fashion device that is designed for vapers who prefer free puff and love good taste and bulk.
Advantages and disadvantages
Disadvantages
Lack of airflow adjustment;
You can not change the power;
Only one type of evaporators.
Advantages
original design;
The presence of a removable cover with a lanyard;
Powerful battery;
fast charging;
Simple control;
Large cartridge volume;
810th removable drip tip;
Excellent flavor and bulk.
