In the last few years, only a lazy (read – non-working) vape manufacturer has not released POD systems and sub-mods, as this format of devices is especially popular among vapers. But this does not mean that vapers have massively shelved their box mods and sabom tanks, and have completely switched to new, compact devices. Vapers who prefer traditional devices are not so few, and especially for them manufacturers periodically release new box mods and tanks. Especially for them Vaptio has developed a new starter kit Procare Kit, which can be confidently used for free hookah and tight cigarette puffs, while getting a compact and reliable device.
General Information
Vaptio Procare Kit is a starter kit consisting of a small Procare Mod box mod with built-in battery and Procare Tank atomizer, designed to use G-series vaporizers. Vaptio Procare box mod is made as a flattened small keg, which has good ergonomics and most convenient to use. The device is equipped with a simple, but productive chipset, thanks to which the vaper will get at his disposal vari-watt power up to 50 watts. Vaptio Procare Tank tank is simple enough, without any special refinements in design, designed for the installation of the new vaporizers series G resistance 0,4 and 1,0 ohm. The Vaptio Procare Kit is available in five colors – Charcoal Gray, Feather Gray, Alice Blue, Pastel Green and Purple Blush.
Equipment
We can’t say that the new starter kit is completed in a special way – everything is banal and standard, but the vaper will get everything that is necessary for trouble-free use of the device:
– Procare mod box mod;
– Procare tank atomizer;
– Two vaporizers G3 mesh 0.4ohm coils;
– USB Type-C cable;
– Warranty card;
– User manual.
Procare mod box mod
Vaptio’s products are not as often seen in vape shops as, for example, Voopoo, Smok or Lost Vape, but vapers who use devices from this manufacturer are almost always happy with them. The company does not claim to be a top seller, but regularly releases new devices that find their buyer. Interestingly enough, Vaptio releases both the currently in-demand POD systems as well as traditional box mods and tanks. One example of this is the new Vaptio Procare Kit starter kit, which will please both an experienced vaper and a beginner.
Vaptio Procare Mod box mod is made in the best traditions of “mod construction” – a small device, the cross section of which is made in the form of a truncated drop, so the device has excellent ergonomics and sits well in the hand. The body is made of zinc alloy with stainless steel inserts, so the new box mod weighs quite a bit. The device is small – 118*33*27,5 mm (the size is specified with the tank), so it will not take much space in your pocket. The mounting area for the atomizer is pretty big – 27 mm, so you can install almost any tank or drip chamber without much difficulty, and they won’t overhang the edges.
Vaptio Procare Mod uses a built-in 2400 mAh battery, the autonomy time of which depends directly on the working power and resistance of the installed vaporizer. The battery is charged via USB Type-C connector located on the bottom end of the device with 3A current, so it will take about 50 minutes to fully charge the battery.
Vaptio Procare Mod works under the control of proprietary chipset, thanks to which the vaper will get at his disposal vari-watt power of 5-50 watts. Rather interestingly realized control of the device – instead of the traditional “+/-” keys it uses a small wheel, by rotating which you can get the same functions of power control and menu navigation. The developers paid attention to the button “Fire” – it is made in the same style as the control wheel, and pressed with a pleasant soft click. The box mod is equipped with a fairly large monochrome display, on which the vaper can find a standard set of information about the device – the battery level, power, time and number of puffs, coil resistance and operating voltage.
Procare tank atomizer
Procare tank atomizer belongs to the class of “unserviced” devices, so you should not expect anything supernatural from it, but at the same time this device has a couple of “features”. One of the interesting features is the evaporator removal mechanism. In order to remove the vaporizer from the tank, you need to press the drip-tip, and then the vaporizer just pops out, so your fingers are not in contact with the rest of the liquid.
This tank is designed to use G-series vaporizers. The manufacturer currently offers two vaporizer options, 0.4 and 1.0 ohms for different types of vaping. The vaporizers are on mesh, so good flavor is guaranteed.
Blow adjustment is traditional – with the rotary ring at the base of the tank, by turning which you can get both RDL and MTL draw.
To refill the tank, you just need to twist the top cap, which opens the filling hole, where you pour 4 ml of liquid.
Conclusions and impressions
Vaptio should be commended, as the new Procare Kit starter kit turned out to be very successful and practical. The kit is easy to use, self-contained, convenient and versatile, thanks to which both a beginner and an experienced vaper can get good flavor and vape.
Advantages and disadvantages
Disadvantages
– A full-fledged MTL draw is not easy to get;
– Significant weight;
– Only two vaporizer options.
Advantages
– Compact size;
– Stylish design;
– Powerful battery;
– Fast charging;
– Easy operation;
– Reliable chipset;
– Original vaporizer ejection system;
– Convenient refilling;
– Mesh vaporizers.
