Many people think of a vaper as a person enveloped in a cloud of delicious vapor, using a powerful device, a sabom tank or a drip. But modern vapers prefer a small amount of vapor and compact self-contained devices, as more and more often they vaporize liquids on salt nicotine instead of alkaline nicotine. Therefore, manufacturers regularly release more and more new Pod systems that can meet the needs of vapers. Voopoo is rightfully considered one of the market leaders, and devices from it are in demand in all formats. This producer actively produces POD-systems that are in great demand and the model range is constantly expanding. Not so long ago the company decided to expand its popular Argus lineup with a new device – Voopoo Argus P1 Pod kit, which is definitely worthy of attention.
Some introductions
Voopoo Argus P1 Pod kit is a compact POD-system, equipped with a medium capacity battery, running GENE.AI 1.2 chip and designed for installation of removable cartridges and vaporizers. The device is made in a quite popular form factor – a square box with rounded corners and edges, and the device is very compact and practical. The device works under the control of chipset GENE.AI 1.2, which set up the output of the device in automatic mode. The POD-system is universal – you can use removable ITO-M vaporizers as well as traditional Argus cartridges with built-in vaporizers. You can buy Voopoo Argus P1 Pod kit in five colors – green, red, silver, Gun metal and black.
Kit
Voopoo company kits their devices pretty standard, but the new device due to the universality of the cartridges used can be completed a bit differently. One of the best options is as follows:
– Argus P1 Device battery pack;
– Argus Pod Empty Cartridge;
– ITO-M1 0.7ohm vaporizer;
– ITO-M3 vaporizer 1.2ohm;
– Cord;
– USB Type-C cable;
– User’s Manual.
Argus P1 Device Battery Pack
Until Voopoo presented its Drag box mod, it was a mediocre Chinese manufacturer that offered pretty standard devices to vapers. But the emergence of Drag brought Voopoo to the top – the company began to occupy the leading position, to keep which it has developed a lot of devices of different formats. Among the popular series of the manufacturer are Drag (what can you do without it), Vinci and Argus. Argus lineup is no less interesting than Drag, but with its own “features” and peculiarities. Once again, the company decided to add it, and presented Voopoo Argus P1 Pod kit – POD-system, which will be of genuine interest to many vapers.
It is worth paying tribute to the designers of the company Voopoo – they get their money (I want to believe that a lot of money) for a reason. Just look at the Voopoo Argus P1 Pod kit and you want to buy it. The case is made of zinc alloy and plastic, and the plastic parts are transparent, so you can see the “insides” of the device – and this always attracts the attention of vapers. The body is square, with beveled and rounded corners and edges, so it sits nicely in the hand. The device is made in a very modest size – 74,6 * 46,7 * 17,4 mm (height with drip-tip cartridge), so it can be easily worn around the neck as a talisman against evil forces (an appropriate ear and a lanyard to wear it available).
Power Voopoo Argus P1 Pod kit provides built-in battery capacity of 800 mAh – not much, but for a couple of days of autonomous work it will suffice.
An important feature of the device is the ability to charge it very quickly thanks to the built-in 15 watt adapter, through which you can get a full charge in 18 minutes. Therefore, we can confidently say that the device is one of the most autonomous. If you believe the manufacturer, charging the device for 5 minutes will allow you to use it without much difficulty for two hours of continuous vaping.
Of course, the Voopoo Argus P1 Pod kit uses a chipset GENE.AI, and to be precise, version 1.2, which allows you to get the power 5-20 watts (set automatically by the chip, depending on the resistance of the installed vaporizer). There are no controls, the device is activated by puffing. To control the level of battery charge under the transparent plastic there are four LEDs, which light up in turn depending on how charged the battery.
Argus Pod cartridge.
Given that the Voopoo Argus P1 Pod kit is a continuation of the line of the same name, it uses exactly the same cartridges as the previous versions. Depending on the vaper’s preference or the kit, you can use both cartridges with built-in vaporizers and replaceable ones. The cartridge in the battery pack is held in place by magnets.
When using cartridges with interchangeable vaporizers they are equipped with well-known vaporizers of ITO-M series with 0,7 and 1,2 Ohm resistance that can please vapers with their taste.
The Voopoo Argus P1 Pod kit has a puff adjustment implemented with a small slider on the side edge of the device.
To refill the cartridge you take it out of the battery box, open the silicone cap on the side and pour 2 ml of liquid.
Conclusions and impressions
We can confidently say that Voopoo Argus P1 Pod kit is not just another POD-system from Voopoo, but a full-fledged device, the development of which was attended by many experts. Thanks to this approach the device turned out to be not just interesting and original, but also practical, autonomous and easy to use.
Advantages and disadvantages
Disadvantages
– To refill it is necessary to remove the cartridge from the battery pack;
– The chipset can make mistakes when selecting power.
Advantages
– Compact size;
– Low weight;
– The original design;
– High capacity battery;
– Very fast charging;
– Ability to install multiple types of cartridges;
– Work with ITO-M vaporizers;
– High performance chipset;
– Adjustable blow-off.
